Lifting Method Of Small Excavator

For novices, the lifting of micro excavator is a very dangerous work, so we must keep in mind the precautions!

1.Lift safely to avoid slipping

Generally, there is a hook behind the bucket, which is most suitable for lifting. Especially when the object must be lifted to a certain length width ratio, if the rope is hung on the track shoe, it is easy to slip during lifting. The selection of hook can ensure that the rope is not easy to slip, which is the most recommended safe lifting method.

When the object to be lifted is close to the excavator, the bucket should be used immediately. In addition, if the distance that must be lifted is not very high, it is very convenient and efficient to lift the hook with crawler shoes.

2.Keep stable and avoid turning over

When lifting the micro excavator, you must stand on the horizontal stop surface; If you need to lift the object on the surface, you can dig a horizontal plane first. The housing orientation of the chassis of small excavators is also very important. The smaller the intersection angle between the lifting angle and the chassis track direction, the safer the small excavator will be. The larger the intersection angle, the more likely it is to cause the collapse of small excavators.

When the micro excavator is lifting, it is actually a case of lever. Always pay attention to the distance between the center of gravity of the lifted object and the center of gravity of the micro excavator.

The closer the lifting object is to the center of gravity of the micro excavator, the safer the micro excavator is, and the lifting capacity can be stimulated to a greater extent. The longer the lifted object leaves the center of gravity of the micro excavator, the greater the risk of collapse of the micro excavator and the more limited the lifting capacity of the micro excavator.

3.Effective practical operation safety first

Pay attention to lifting objects. If you don’t need to lift them too high, you must not lift them too high. Once the mini excavator is in danger of collapse, you should put down your arm at the first time and quickly put the lifted object on the road.

Finally, when lifting, ensure that there are no workers around. Before lifting, ensure that the lifting cable is vertical to avoid casualties caused by collision.