How to run in the small excavator after purchasing?

In fact, in the current market, many people will choose to buy small excavators, because this can effectively facilitate daily operations, but when we choose to buy, the manufacturer will also tell us that any excavator needs After a break-in period. Whether you choose to buy a mini excavator, a small excavator, or other excavators, you first need to prevent early wear and tear, so that the service life can be effectively extended, which must also be paid attention to.

First of all, after purchasing a small excavator, it needs to be run-in. For example, the words “run-in period” should be hung in a very obvious place of the small excavator, so that the relevant personnel can know how to use it during the run-in period, and can be removed directly after the run-in period. . In the process of choosing the running-in, it is necessary to know that the deceleration of the general engine should be guaranteed to be within 20% of the speed, and you cannot choose to open the speed-limiting device of the engine. After the running-in period, there will naturally be professional personnel. to uncover.

It is also forbidden to slam the accelerator when starting the engine. If the engine is started at low temperature, it needs to be warmed up for at least 20 to 50 seconds. After the engine is started, it should keep running for 3 to 5 minutes, and the cooling water temperature should rise to 40 degrees. , so that the load and speed can be effectively increased. The technical preparation before the engine starts and the technology after the engine is turned off, and the work should also be understood, so after choosing to buy a small excavator, the correct running-in is very important.