Application Field Of Small Excavator

Because of its small size and low initial capital investment, small excavators are widely used in the fields of decoration, agriculture, animal husbandry and landscape in big cities. Today, let’s take a look at the industries in which micro excavators can be used.

1. Municipal road engineering industry: in municipal management, it is inevitable to excavate pipe ditches and bury pipes in foundation pits. Micro excavators have become the best choice because of their small volume and strong flexibility. In addition, the arm of the micro excavator can swing 60 degrees, which is very useful when digging against the wall. Mini excavators are also more convenient for transportation. Light trucks and even pickup trucks can be used for transportation.

2. House decoration: the rotten holes in the wall must be removed during house decoration. The use of micro excavator is more efficient than manual hammer. The specification of mini excavator is relatively small. You can go up and down stairs according to indoor stairs or even elevator car.

3. Road expansion of rural self built houses: when the original rural self built houses were built, manual foundation pit excavation of sewer subgrade and pipe trench was required. Now, those jobs can be solved by small excavators, which not only alleviates the labor efficiency of workers, but also further improves the operation speed.

4. Tunnel construction: the length width ratio of small excavator is very low, so it can drive into some small and medium-sized tunnels for engineering construction. We also have even developed small electric excavators, which can better integrate into the natural environment of tunnel construction.

5. Landscape work: the natural environment of agricultural and animal husbandry landscape work is very narrow, and the surroundings are often covered by wood seedlings and crops. In the maintenance of agricultural and animal husbandry parks, it is impossible to make good use of large machinery for excavation and trenching, and micro excavators are just suitable.

6. Vegetable greenhouse excavation: greenhouse vegetables are generally short, and large and medium-sized agricultural vehicles cannot work in it, so micro excavators are used to dig and dig ditches.

7. Slag cleaning of steelmaking furnace: the key application of steelmaking furnace or heating furnace weapons and equipment in ironmaking plant is that a large amount of slag will be produced in the whole smelting process. In the whole slag removal process, micro excavators are often used to turn over and clean the slag. The working natural environment is extreme, which has greatly honed the driver and excavator.

8. Dangerous work at heights: in news reports, we often see some small excavators working on cliffs, such as cliff construction or disaster relief. The chassis of this excavator can be tilted to keep a part of the cab horizontal. At the same time, galvanized steel wire rope is used to hang and train the excavator. In fact, it takes a lot of courage to operate this kind of excavator!